24V Dimmable LED Driver
FAHOLD manufactures 24V dimmable LED drivers and power supplies for constant-voltage LED strip, linear, cabinet, display and architectural lighting systems. Our 24V DC product range includes 5-in-1 dimming and TRIAC / ELV / MLV phase-cut options, with 0–10V and PWM control available on compatible models.
Choose from enclosed IP65 and waterproof IP67 driver platforms, with 100–277Vac input options for commercial lighting and selected 100–120Vac models for North American wall-dimmer installations.
Compare the 24V dimmable LED power supplies below by wattage, dimming compatibility, enclosure and output configuration. Request datasheets, samples or an OEM quotation from FAHOLD for your lighting project.
L2D-060X-024 60W 24V Class 2 Constant Voltage LED Driver
- Power60W
- Input100–120Vac (90–132Vac extreme)
- Output Voltage24Vdc
L2D-100X-024 96W 24V Class 2 Constant Voltage LED Driver
- Power96W
- Input100–120Vac (90–132Vac extreme)
- Output Voltage24Vdc
Page 2 of 2
24V Dimmable LED Power Supplies for Commercial Lighting
A 24V dimmable LED driver supplies regulated 24V DC power to compatible constant-voltage LED loads while allowing the lighting system to adjust brightness through a supported dimming control.
For a project specified around 24V LED strips or luminaires, choosing the right power supply involves more than matching voltage and wattage. The dimming interface, enclosure, AC input range, number of output channels and installation conditions can all affect product selection.
FAHOLD supplies 24V dimmable constant-voltage LED drivers for architectural and commercial lighting applications. Available platforms include multi-mode 5-in-1 solutions and dedicated phase-cut options for compatible North American lighting systems.
Compare FAHOLD 24V Dimmable LED Driver Platforms
FAHOLD offers different 24V power supply platforms to match enclosure, electrical and control requirements.
| Product Series | Available 24V Model Classes | Dimming & Installation |
|---|---|---|
| L2-A | 30W–400W classes | Enclosed IP65, 100–277Vac input, 5-in-1 dimming |
| L2-F | 60W–400W classes | IP67 waterproof, 100–277Vac input, 5-in-1 dimming |
| L2D Type B | 60W and 96W rated models | 100–120Vac input, TRIAC / ELV / MLV phase-cut dimming |
The wattage classes above describe the respective product families. Actual rated output and per-channel limits must be checked against the selected model's datasheet.
The L2-A 5-in-1 LED driver range is suited to projects requiring an enclosed power supply with protected connections. The L2-F waterproof LED driver range offers IP67 protection for installations where greater resistance to water and dust ingress is required.
For 120V AC lighting circuits using compatible wall dimmers, the L2D TRIAC LED driver range provides dedicated phase-cut options. Specify Type B when dimming is required, as Type N is non-dimmable.
Choose a 24V LED Power Supply by Dimming Method
The lighting controller should be identified before selecting a 24V dimmable power supply.
TRIAC / Phase-Cut Dimming
Suitable for compatible wall-dimmer installations, particularly in residential, hospitality and architectural lighting. Check whether the project uses forward-phase, reverse-phase or another supported phase-cut control method.
0–10V Dimming
Used in many commercial lighting control systems. Compatible 24V drivers respond to a separate low-voltage dimming signal, allowing brightness control through an appropriate controller.
PWM Dimming Control
Certain 24V LED driver configurations accept a compatible PWM control signal. PWM input control should not be confused with a separate PWM controller installed between a fixed-output power supply and an LED load.
5-in-1 Dimming
For projects with different lighting-control requirements, FAHOLD 5-in-1 dimmable LED drivers provide a flexible product platform. The supported control modes must still be verified for the selected driver configuration.
Dimmer compatibility, minimum load, required dimming range and controller specifications should be confirmed before finalizing a lighting project.
How to Select the Right 24V Dimmable LED Driver Wattage
Start with the total rated power of the connected 24V LED load. Then verify that the driver can supply the required current under the installation's operating conditions.
For a 24V constant-voltage system:
Output Power (W) = 24V × Output Current (A)
For example, a 24V / 2.5A output provides 60W of rated DC power, while a 24V / 4A output provides 96W.
When selecting a driver, also consider:
- Total connected LED load and appropriate power headroom
- Maximum current for each output channel
- Cable length, conductor sizing and voltage drop
- Ambient temperature and enclosure requirements
- Required dimming method and controller compatibility
- Applicable Class 2 circuit limits and certifications
For higher-power installations, some FAHOLD 24V platforms use multiple output channels. Total rated wattage should not be mistaken for the permitted load on each individual channel.
Applications for 24V Dimmable LED Power Supplies
24V LED Strip Lighting
Dimmable 24V power supplies are used with compatible LED strips in commercial interiors, coves, retail displays and decorative lighting. At the same output power, a 24V system draws half the current of a 12V system, which can help with power distribution and voltage-drop management.
Architectural and Linear Lighting
24V constant-voltage drivers support compatible linear lighting systems used in offices, hotels, restaurants and other architectural environments. Select the control method according to the lighting management system and required dimming performance.
Cabinet, Shelf and Display Lighting
Compact 24V dimmable drivers can support compatible under-cabinet lighting, retail shelving, illuminated displays and decorative fixtures where installation space and low-load dimming behavior matter.
Commercial and Protected Lighting Installations
Projects requiring protected wiring connections or greater ingress protection can be evaluated using FAHOLD's enclosed IP65 and waterproof IP67 driver platforms. Installation suitability must be confirmed for the selected product and environment.
Explore additional LED strip and linear lighting power supply solutions for application-specific requirements.
OEM 24V Dimmable LED Driver Manufacturer & Supplier
FAHOLD works with lighting manufacturers, distributors, contractors and project buyers sourcing 24V dimmable LED power supplies for commercial and architectural applications.
Our team can help compare available driver models, review dimming compatibility, provide technical documentation and evaluate OEM/ODM requirements for qualified projects.
For an accurate recommendation or quotation, send us your:
- Required 24V output wattage and load configuration
- AC input voltage and destination market
- Dimming method and controller or dimmer model
- IP rating, enclosure and installation requirements
- Required safety certifications
- Estimated order quantity and project schedule
Request a Quote: Contact FAHOLD to compare suitable 24V dimmable LED drivers, request product datasheets or discuss samples for your next lighting project.
Frequently Asked Questions
1. What is a 24V dimmable LED driver?
A 24V dimmable LED driver is a power supply that provides regulated 24V DC output while supporting compatible brightness control. Constant-voltage models are commonly used for 24V LED strips, linear lighting, cabinet lighting and architectural fixtures.
2. Can a 24V dimmable LED driver work with TRIAC and 0-10V dimmers?
Yes, depending on the driver model and configuration. FAHOLD offers 24V 5-in-1 platforms with multiple dimming options, including compatible TRIAC, ELV, MLV and 0–10V control methods. Always verify the selected model and controller compatibility before installation.
3. Do you offer 24V dimmable LED power supplies for 120V and 277V AC input?
Yes. FAHOLD L2-A and L2-F 5-in-1 platforms support a rated 100–277Vac input range, covering common 120Vac and 277Vac commercial power systems. The L2D phase-cut platform uses a 100–120Vac rated input range and requires a compatible Type B configuration for dimming.
4. How do I choose the right wattage for a 24V dimmable LED driver?
Calculate the total wattage of your connected 24V LED load and select a driver with suitable rated capacity and operating headroom. For example, a 24V / 4A output delivers 96W. For multi-channel drivers, verify the permitted load on each channel as well as the total output rating.
5. What is the difference between IP65 and IP67 24V dimmable LED drivers?
IP65 and IP67 describe different levels of ingress protection. FAHOLD L2-A uses an enclosed IP65 platform, while L2-F provides an IP67 waterproof architecture. The final selection should consider the installation environment, wiring connections, mounting conditions and applicable product certifications.
6. Can FAHOLD supply OEM 24V dimmable LED drivers for lighting projects?
Yes. FAHOLD supports OEM/ODM lighting projects with model selection, technical documentation, dimmer compatibility evaluation, samples and quotation support. Share your output power, input voltage, dimming interface, installation requirements, certifications and order quantity to discuss suitable 24V driver options.
